Working Process Steps of Wafer Cup Making Machine
Publish Time: 2024-08-20 Origin: Site
Steps in the Coffee Cup Making Machine's Operating Process
1. Place the machine flat, without tilting, on the horizontal table.
2. Attach the power supply, adjust the mold's temperature in accordance with the necessary formula, and then watch for the temperature to rise.
3. The next die closes when the temperature drops and the higher die pulls up.
4. After pouring the paddle into the lower mold and closing the upper die with the next mold, the paddle bakes for about a Chita, allowing the cone to develop.
5. Raise the upper die of the coffee cup maker; this will open the lower die, allowing the cone to glide out of the channel below.
6. Repetition of the previous step, the last usage, and prompt cleaning
Most importantly, please remember to wipe a layer of edible oil into upper and lower mold.